Snowplow operators, homeowners, farmers and ranchers have many questions about the slick and durable UHMW poly cutting edges (aka ploy blades) available from May Wes Manufacturing.

This FAQ about Poly Snowplow Blades answers the most common questions snowplow operators are asking. If you have additional questions, please give us a call at 1-800-788-6483.

What material are May Wes Poly Cutting Edges made from? 

May Wes Poly Cutting Edges are manufactured from virgin UHMW Poly right here in our Hutchinson, Minnesota plastic fabrication shop. We do not use reground poly like many of our competitors. Our skilled plastic fabricators cut and drill them to your specification on our Komo CNC router. UHMW is the same slick and durable plastic we use to manufacture May Wes premium skid shoes for grain heads and G4 Stalk Stompers. It is also used to make C&A Pro high performance snowmobile skis used by professional snocross racers.

How long will a May Wes poly snowplow cutting edge last?

The life expectancy of your poly snowplow cutting edge will depend on how much you use it, the thickness of your poly blade, the surface you are plowing and what you are plowing. The thicker the blade, the longer it will last. Our poly blades are used by DOTs, cities, commercial plowing services, homeowners, farmers and ranchers. We used the poly blade on our shop truck for two winters before flipping it over to double its life. Our parking lot is part asphalt and part gravel (Note: poly cutting edges are recommended for paved surfaces only; gravel will wear them out faster.). Unless you specify otherwise, we drill the holes down the center so you can flip the UHMW blade over when the first side wears out.

What materials can you plow with a Poly Cutting Edge?

Most of our customers use them to plow snow, but we’ve had customers use them to plow manure, hay and straw, fertilizer and other materials.

Vertical snowplow cutting edges are straight and the holes are drilled through.

Does May Wes have a UHMW Poly Cutting Edge available for my make and model of bucket or plow?

We make all of our cutting edges custom to your specification and can make cutting edges for just about every snowplow, bucket, pusher or box blade out there. We just need to get a few measurements from you.

What is the difference between a vertical snowplow and a horizontal snowplow?
Horizontal plows are what you see on tractor or skid steer buckets. The cutting edge runs horizontally on the ground. For horizontal applications, we will bevel cut the cutting edge and countersink the holes. Vertical plows are what you see on snow pushers, pickup or ATV plows, box blades and the back of snow pushers. They are cut with straight edges and holes are drilled through .

Can May Wes make skid shoes for the bottoms of my snow pusher?
Yes. We can custom make you UHMW skid shoes for your snow pusher, just like we did for Larson Farms!

Horizontal cutting edges are beveled and the holes are counter sunk.

What measurements does May Wes need to make my custom snowplow cutting edge?

We will need to know the length of the plow, plus which thickness and width you would like. We also need your hole measurements if you would like us to drill the holes for you. Measure your holes from the edge of the plow to the center of each hole. Measure twice as custom poly cutting edges cannot be returned. It can be helpful to provide a drawing if you have stacked hole patterns. Please specify if your holes need to be drilled off center, otherwise we will drill them down the center. Please watch this video for measurement instructions.

What thickness of snowplow cutting edge do I need?

We offer 3/4″, 1″ and 1 1/2″ UHMW poly cutting edges. We recommend using the thicker poly blades for commercial and farm use. The thinner blades are more suitable for plowing homeowner driveways. The thicker the blade, the longer it will last.

How wide of a cutting edge should I get for my snowplow?

Generally speaking, get the same width and length as your metal snowplow cutting edge, but if you have space for a wider poly blade, go for it as it will last longer.

How far back are the bevels cut on May Wes horizontal poly cutting edges?

We CNC cut the the bevels at a 45 degree angle. On a 3/4″ poly blade, the bevel starts 3/8″ from the edge. On a 1″ thick cutting edge, the bevel starts at 5/8″. On a 1 1/2″ cutting edge, the bevel starts at 1″ from the edge

How deep are the counterbore holes cut on May Wes horizontal poly cutting edges (aka poly blades)?

3/4″ thick cutting edges will have .45″ UHMW material left. 1″ and 1 1/2″ cutting edges will have .65″ UHMW material left.

How do I order a May Wes poly cutting edge?

You can order your May Wes poly blade through your local May Wes dealer, order online at www.maywes.com or give us a call at 1-800-788-6483.

How long will it take to get my custom May Wes poly cutting edge?
Our plastic fabricators can typically make your custom snowplow poly blade in a couple of business days. Please allow time for shipping. During the busy harvest season, our lead times can get extended.

How are May Wes poly blades shipped?
Poly cutting edges are normally shipped UPS or Spee-Dee, or you can pick them up at our shop in Hutchinson, Minnesota. Poly blades longer than 94″ that cannot be seamed will be shipped LTL freight or you can pick them up.

Have more questions? Please call us at 1-800-788-6483.